Advertisement
(1) Disconnect the connector, and remove the fin-
isher from the main unit.
(2) Remove the cover from the caster of the fin-
isher. (Two screws)
(3) Remove the rear cover from the finisher. (Eight
screws)
(4) Adjust the height of the four casters.
A3EPIXC029DC
(5) Double check the verification items ➀ and ➁.
*
If there are any problems, go back to (4) and
readjust the caster height.
(6) To install the covers and other parts removed
in step (2) to (3), reverse the removal proce-
dure.
(7) Plug in the connector removed in step (1).
(8) Install the finisher to the main unit.
37. Push the lever back to its original position.
A3EPIXC030DA
Secure the finisher to the main unit. (One sup-
plied mounting screw)
A3EPIXC031DB
38. Close the front door of the finisher.
E-11
A3EPIXC032DA
A3EPIXC061DA
Advertisement
