Table of Contents
Advertisement
v Advanced management module event log: This log contains a filtered subset of
v DSA log: This log is generated by the Dynamic System Analysis (DSA) program,
Working with event logs during system startup
Use this information to view or clear the event log when starting the blade
appliance.
To work with the error and event logs, complete the following steps:
1. Turn on the blade appliance.
2. When the prompt <F6> System Event Logs is displayed, press F6. If you have
3. Select one of the following:
Viewing event logs without restarting the blade appliance
If the blade appliance is not hung, methods are available for you to view one or
more event logs without having to restart the blade appliance.
You can view the advanced management module event log through the Event Log
link in the advanced management module Web interface. For more information,
see the advanced management module User's Guide.
30
IBM WebSphere DataPower Integration Blade XI50B Type 4195: Installation and User's Guide
the system-event log. When you are troubleshooting, you might have to save
and then clear the system-event log to make the most recent events available for
analysis.
Messages are listed on the left side of the screen, and details about the selected
message are displayed on the right side of the screen. To move from one entry
to the next, use the Up Arrow (↑) and Down Arrow (↓) keys.
Some IMM sensors cause assertion events to be logged when their setpoints are
reached. When a setpoint condition no longer exists, a corresponding deassertion
event is logged. However, not all events are assertion-type events.
IMM, POST, and system management interrupt (SMI) events. You can view the
advanced management module event log through the advanced management
module Web interface.
and it is a chronologically ordered merge of the system-event log (as the IPMI
event log) and the IMM chassis-event log (as the ASM event log). You can view
the DSA log through the DSA program.
set an administrator password, you must type it to view the event logs.
v To view the POST event log, select POST Event Viewer.
v To view the system-event log, select System Event Log.
v To clear the system-event log, select Clear System Event Log.
Advertisement
Table of Contents
