Table of Contents
Advertisement
advanced-management-module Web interface. For more information about the
advanced-management-module Web interface, see http://www.ibm.com/systems/
management/.
Information LED: When this amber LED is lit, it indicates that information about a
system event in the blade appliance has been placed in the advanced-management-
module event log. The information LED can be turned off through the
advanced-management-module CLI, SNMP, or Web interface. For more information
about the advanced-management-module Web interface, see http://
www.ibm.com/systems/management/.
Fault LED: When this amber LED is lit, it indicates that a system error has
occurred in the blade appliance. The blade-error LED turns off only after the error
is corrected. If the error has occurred in the blade appliance expansion unit, the
fault LED on the expansion unit is also lit.
Power-control button: Press this button to turn on or turn off the blade appliance.
Note: The power-control button has effect only if local power control is enabled
for the blade appliance. Local power control is enabled and disabled through the
advanced-management-module Web interface.
Keyboard/video/mouse (KVM) select button: Press this button to associate the
shared BladeCenter unit keyboard port, video port, and mouse port with the blade
appliance. The LED on this button flashes while the request is being processed and
then is lit when the ownership of the keyboard, video, and mouse has been
transferred to the blade appliance. It can take approximately 20 seconds to switch
the keyboard, video, and mouse control to the blade appliance.
Using a keyboard that is directly attached to the advanced management module,
you can press keyboard keys in the following sequence to switch KVM control
between blade servers and appliances instead of using the KVM select button:
If there is no response when you press the KVM select button, you can use the
advanced-management-module Web interface to determine whether local control
has been disabled on the blade appliance. See http://www.ibm.com/systems/
management/ for more information.
Media-tray select button: Press this button to associate the shared BladeCenter
unit media tray (removable-media devices) with the blade appliance. The LED on
the button flashes while the request is being processed and then is lit when the
ownership of the media tray has been transferred to the blade appliance. It can
take approximately 20 seconds for the blade appliance to recognize the media tray.
If there is no response when you press the media-tray select button, you can use
the advanced-management-module Web interface to determine whether local
control has been disabled on the blade appliance. See the IBM BladeCenter Advanced
Management Module User's Guide for information and instructions.
10
IBM WebSphere DataPower Integration Blade XI50B Type 4195: Installation and User's Guide
NumLock NumLock blade_server_number Enter
blade_server_number is the two-digit number of the blade-server bay in which
the blade appliance is installed. Since the blade appliance occupies more than
one blade-server bay, it is identified by the lowest bay number that it occupies.
Advertisement
Table of Contents
