Hanseatic KECS8003TC-GS User Manual page 46

Page 14 Start-up
2. Wind the mains cable (27)
around the bottom of the
base (8) and thread the mains
cable through the notch (26) in
the socket.
3. Insert the mains plug into a
properly installed and easily
accessible socket.
4. Fill the water tank (11) with
fresh tap water to the MAX fill
level indicator (7) and heat it
as described in section 'Oper-
ation' on page 15.
5. Pour this first batch away after
heating.
6. Repeat steps 4 and 5 two to
three times.