Drain Valve; Bleed System; Power Outages; Health Regulations - Seeley Breezair EXS Owner's Manual

WATER MANAGEMENT

DRAIN VALVE

If your cooler has been installed with a drain
valve, it is accompanied by the WaterMiser
salinity probes. When the tank's water salinity
level reaches a preset level the WaterMiser
open the drain valve and release saline water.
Fresh water will then be added diluting any
minerals or salts accumulated. The WaterMiser
will continue to monitor and drain water as
required.
Alternatively, the cooler can be set to drain
saline water at a preset period of pump
operating time. This can be set by changing
the salinity control method selector via the
cooler settings screens.
Note! When the cooler's tank is empty and the
cooler is turned on again, the fan operation will
be delayed as the tank is refilled and the pads
are saturated.

BLEED SYSTEM

If fitted, the bleed system will constantly drain
small amounts of water during the operation of
the cooler. This allows fresh water to be added
diluting any minerals and salts accumulated.
The bleed rate for your cooler will depend
on local operating conditions and will be
set by the installer.

POWER OUTAGES

After a power outage the MagIQtouch Controller
will prompt you to enter the date and time.
If the AUTO RESTART option is switched on in
the SETTINGS menu, the following actions will
result:
• If the cooler was last running in MANUAL
mode, it will automatically restart only after
the date and time have been confirmed.
• If the cooler was last running in PROGRAM
mode, it will automatically restart, even before
the time and date have been set, according
to the last time recorded before the power
outage.

HEALTH REGULATIONS

In some regions, regulations require that
evaporative air coolers be serviced at specific
intervals.
|
6

MAINTENANCE

WARNING! As your cooler is mounted on
the roof, we suggest that any maintenance
®
or checks be carried out by an authorised
Seeley International dealer or service agent.
will
®
Climbing onto the roof can be hazardous
and could result in injury to you and
damage to your property.
®
For gaining access to the cooler refer to the
Removing Pad Frames section.
Maintenance Schedule servicing is essential to
ensure the cooler operates efficiently for many
years. It must be carried out by a qualified,
licensed technician. The following pages
outline the suitable maintenance requirements
to ensure that your cooler continues to operate
efficiently.

SCHEDULED MAINTENANCE

We require that the following components
and the operation thereof, be checked/
serviced after the first year, then every 2
years for residential purposes, or every year
for commercial purposes, as Maintenance
Schedule servicing. Refer to the Maintenance
Schedule section.
• Water distribution spreader trays.
• Pump.
• Drain valve.
• Solenoid and associated filter / fittings.
• Fan motor operation.
• Float valve.
• Salinity probes etc
Maintenance Schedule servicing should be
performed before the summer season. It is
important to note that all evaporative coolers
have components that may need periodic
replacement (eg. filter pads, hoses, o-rings
etc).
Note! Failure to carry out the Maintenance
Schedule services will void your warranty
cover.
Note! Maintenance Schedule servicing
may be required more frequently in adverse
environmental situations or where the
appliance is installed in non-domestic
applications. Please consult with the installer
or service personnel to determine if more
frequent servicing is required.