Fitting The Operating Element - Fein Dustex 25 L Repair Instructions

Saugen
Assembly

Fitting the operating element

Steps that must be completed:
- Fit the housing
- Fit the mains cable
- Fit the motor
- Fit the base plate
- Assembling the electronics
Tools:
- Torx T15 (length: 89 mm)
- PH1 cross-head screwdriver
1
4
3
6
C-SC_CSSM
1.
2
2.
3.
4.
5
5.
6.
7.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the socket.
Screw in the two screws (1).
Position the rotary knob (2).
Position the switch (3).
Position the holder (4).
Screw in the two screws (5).
Connect the cables (6).
I
NFORMATION
Ensure that the connection diagram is observed.
10.12.2019 Page 42 of 45