Fitting The Electronics (Fein Dustex 25 L; Fein Dustex 35 L) - Fein Dustex 25 L Repair Instructions

Saugen
Assembly

Fitting the electronics (FEIN Dustex 25 L; FEIN Dustex 35 L)

Steps that must be completed:
- Fit the base plate
- Fit the motor
- Fit the mains cable
- Fit the housing
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
N !
OTE
Damage from electrostatic charge.
Failure to comply with the safety regulations for ESD
protection may cause damage to the electronics.
Only perform assembly/disassembly work on electronics at a
workstation with ESD protection.
Connect the cables (1).
I
NFORMATION
Ensure that the connection diagram is observed.
Position the electronics (2).
10.12.2019 Page 39 of 45