Advertisement
Available languages
Available languages
Replacing remote control batteries
Replace used batteries by gently inserting your fingernail or small screwdriver in the
groove on the left side of the battery compartment cover.
Lift the cover off and insert a fresh set of batteries.
Be careful to follow the + and – polarity indications at the bottom of the battery compartment.
Battery: 2 x LR03 / AAA: 1.5Volts
Input configurations
XLR input:
1 = ground
RCA:
Circle = ground
Output configurations
XLR output: 1 = ground
Speaker:
Red = positive
RCA to XLR adopter: ECP5XLR:
Diagram 5
Diagram 6
2 = positive
Center = positive
Diagram 6 and 1
2 = positive
Black or White = ground
1 & 3; ground and negative = shorted, 2 = positive
4
3 = negative
3 = negative
USA
GB
Advertisement
