Safety Notes; Components Bundle - SELFSAT SNIPE DRIVE User Manual

1-3. Safety notes

In order to ensure that your SNIPE DRIVE works properly you must
ensure that it is following by the Operating Instructions in this manual and
used as intended purpose.
If the system cannot fully be removed due to user's negligence, then it is your
responsibility to check that the antenna is properly stored in safe.
Please also note that different legal requirements are applied to the operation
of electrical and electronic equipment in different countries. As the user of this
equipment, you are responsible for yourself ensuring compliance with the
relevant laws and regulations.
The manufacturer does not take liability for direct or indirect consequential
damage of the system, motor vehicles or other equipment by reason of unsuit-
able battery usage or erroneous installation or wrong wire connection.

2-1. Components bundle

Main unit
Power input cable
2. Contents
Controller
Cable holder Cable gland
Receiver cable (1m)
Screws M4x20(11),
M4x25(2)
Controller cable (7m)
User manual
3