Channel Option; Save And Recall; Configuration Menu Introduction; Module Keyboard Lock - ITech IT8700 Series User Manual

EAPAND MODULE
ON
OFF<DEFAULT>
Production protocol
LANGUAGE SET
SCPI〈DEFAULT〉
EXTEND TABLE
Main module production information
ABOUT
IT8700
VER: X.XX
SN: XXXXXXXXXXXXX
EXIT
Automatic test menu
Press
PROGRAM
Run the testing flie
RUN PROGRAM
Recall the testing file
RECALL PROG
Edit the testing file
EDIT PROGRAM
EXIT

3.1.3 Channel option

IT8701 and IT8702 can switch the channel. There're 3 ways to switch channel:


Press

When in SETUP menu, you can directly press the number keys to switch.

3.1.4 Save and recall

First select the channel to be edited at the main frame front panel, after having
edited, press
in location 1. Press
saved earlier

3.1.5 Configuration menu introduction

Details on each channel menu function. For example, if you don't want the 3
channel to work with other channels synchronously, you can switch to channel
3 on the main frame, press
VFD views <SYNC ON SET> ，press
the same method to setup other functions in the configuration menu.

3.1.6 Module keyboard lock

Press
and knobs of the current channel panel, press
unlock.
Enable this function
Disable this function
SCPI protocol
Expand SCPI protocol, compatible with others
Main frame production model number
Main frame software version
Main frame production serial number
6 6
Shift Shift
+ key to enter the menu function.
Chan Chan
+number key to switch channel.
▼ ▼
Chan Chan
/ key to switch.
Save Save
key to save, press 1 numeric key to save to the first group
Recall Recall
key to recall, and then press key 1 to recall the file
8 8
Shift
+ key to lock the Short、 Tran、 Mode、 On/Off operation keyboard
Copyright © Itech Electronic Co., Ltd.
5 5
Shift Shift
+ key to enter module configuration menu,
Enter Enter
key to enter, setup OFF state. In
Panel function introduction
8 8
Shift Shift
+ key again to
20