Connecting The Power Cord - ITech IT8700 Series User Manual

IT8700 Module
Detailed Dimension Drawing

1.4 Connecting the Power Cord

Connect the power cord after checking that the power switch of the instrument
is turned OFF.
AC power input level
IT8700 series electronic load support 110V/220V AC input. Please pay
attention to the AC level setup before provide AC power. (The AC line switch is
located at the rear of the unit.)

Option Opt.1: 220V ±10% 50Hz/60Hz

Option Opt.2: 110V ±10% 50Hz/60Hz
Input voltage selection
The load can work under 110/220V±10%AC input, as the label shown on the
rear（refer to figure 1-4）. If the default value on the label doesn't match your
region's, please switch the black key to choose input line voltage, and then
insert power cord. Choose the right linear voltage as following.
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
7