Xpelair GX12 EC3 RF Installation And Maintenance Instructions Manual page 4

7. Refit the back draught shutter and inner grille assembly and
secure with the fixing screw. Do not over-tighten the screws
8. Refit the screw covers.
• Never use strong solvents to clean the fan.
• Apart from cleaning, no other maintenance is required.
Step 3
Step 1
NOTE: THE FAN WILL CONTINUE TO OPERATE WITH
THE INNER GRILLE ASSEMBLY REMOVED, HENCE IT
MUST BE ISOLATED COMPLETELY FROM THE MAINS
BEFORE ANY WORK IS CARRIED OUT.
Fig. 1
Step 3
Step 2
Fig. 2
Fig. 3