Advertisement
Quick Links
Advertisement
Related Manuals for Xpelair GX12 EC3 RF
Summary of Contents for Xpelair GX12 EC3 RF
- Page 1 GX12 EC3 RF fan Installation and maintenance instructions Retain for future reference...
- Page 2 • Window, wall, panel or roof mounted (see section 2). WARNING: DO NOT MAKE ANY CONNECTIONS TO • 5 speed extract operation when installed with a GX12 EC3 RF THE ELECTRICAL SUPPLY AT THIS STAGE. switch (not supplied).
- Page 3 7. Mount the fan in the hole (Fig. 4). underside of the grille then unclipping the bottom of the grille, Xpelair recommend that the instructions of this section are carried the top of the grille can then be released by unclipping the top out by two people.
- Page 4 7. Refit the back draught shutter and inner grille assembly and NOTE: THE FAN WILL CONTINUE TO OPERATE WITH secure with the fixing screw. Do not over-tighten the screws THE INNER GRILLE ASSEMBLY REMOVED, HENCE IT 8. Refit the screw covers. MUST BE ISOLATED COMPLETELY FROM THE MAINS BEFORE ANY WORK IS CARRIED OUT.
- Page 5 Fig. 5 Fig. 4 Fig. 6 Fig. 8a Fig. 8b Operating bar Fig. 7 Shutter return spring Fig. 9...
- Page 6 Fig. 10 Components (Fig. 10) A. Inner Grille E. Outer Clamp Plate / Grille B. Back draught shutter assembly F. Ladder Strips C. Fan assembly G. Connector Plate D. Inner Clamp Plate H. Pairing Switch...
- Page 7 This page has been left blank for the addition of any notes you may wish to make.
- Page 8 In the event of a product being returned to Redring Xpelair Group Limited and not found to be faulty, the product would be available for collection from the relevant premises within one month and if not collected it would be disposed of or delivered by Redring Xpelair Group Limited and a delivery charge made.