Front And Rear Disc Brake - PIAGGIO Beverly 125 Maintenance Manual

Hide thumbs Also See for Beverly 125:
Table of Contents

Advertisement

Characteristic
Engine idle speed
1,650±100 rpm

Front and rear disc brake

The brake disc and pad wear is automatically compensated, therefore it has no effect
on the functioning of the front and rear brakes. For this reason it is not necessary to
adjust the brakes. An excessively elastic brake lever stroke may indicate the presence
of air in the braking circuit or a failure in the braking system. In this case, mainly due
to the importance of brakes to guarantee safe riding conditions, the vehicle should be
taken to an Authorised Service Centre or Dealer.
CAUTION
THE BRAKING ACTION SHOULD BEGIN AFTER ABOUT 1/3 OF THE BRAKE
LEVER STROKE.
CAUTION
HAVE THE BRAKE PADS CHECKED BY THE DEALER ACCORDING TO THE
CHECKS SPECIFIED IN THE SCHEDULED MAINTENANCE TABLE. HOWEVER,
IN THE EVENT OF NOISES COMING FROM THE FRONT AND/OR REAR BRAKE
SYSTEM DURING OPERATION, IT IS ADVISABLE TO HAVE THE BRAKE SYS-
TEM CHECKED BY A PIAGGIO DEALER OR AUTHORISED SERVICE CENTRE.
AFTER REPLACING THE BRAKE PADS, DO NOT USE THE SCOOTER BEFORE
HAVING USED THE BRAKE LEVER SEVERAL TIMES IN ORDER TO ALLOW THE
PISTONS TO SETTLE AND THE LEVER STROKE TO BE SET TO THE CORRECT
POSITION.
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents