Reprocessing The Mask Between Patients; Technical Specifications - ResMed AirFit P10 User Manual

Reprocessing the mask between patients

The mask should be reprocessed when used between patients.
Cleaning, disinfection and sterilisation instructions are available from
the ResMed website, www.resmed.com/masks/sterilization. If you do
not have internet access, please contact your ResMed representative.

Technical specifications

Pressure-flow curve
The mask contains passive venting to protect against rebreathing.
60
50
40
30
20
10
0
4 6 8
Mask pressure (cm H
Pressure
4 cm H O
2
8 cm H O
2
12 cm H O
2
16 cm H O
2
20 cm H O
2
10 12 14 16
O)
2
AirFit P10 / AirFit P10 for Her
Flow (L/min)
20
29
37
43
49
Deadspace: Empty volume of mask to swivel. The deadspace of the
mask varies according to pillows size.
Therapy pressure (cm H
Resistance: Drop in pressure measured (nominal) (cm H
at 50 L/min
at 100 L/min
Sound – DECLARED DUAL-NUMBER NOISE EMISSION VALUES in
accordance with ISO 4871. The A-weighted sound power level and the
A-weighted sound pressure level of the mask, at a distance of 1 m, with
uncertainty of 3 dBA, are shown.
Power level
18 20 Pressure level at 1m
Gross Dimensions – Mask fully assembled – no headgear.
Height
Width
Depth
Environmental conditions – all masks:
Operating temperature: +5°C to +40°C
Operating humidity: 15% to 95% non-condensing
Storage and transport
Storage and transport humidity: up to 95% non-condensing
7
AirFit P10 / AirFit P10 for Her
123 mL (Large)
O)
2
4-20
0.4
1.4
21 dBA
13 dBA
590 mm
149 mm
30 mm
–20°C to +60°C
temperature:
O)
2