Quick Start Guide Contents What's Included Battery Installation Running the Connection Wizard Connecting to your WiFi Network LogTag Online Remote Configuration 10 Downloading LogTag Analyzer Configuration in LogTag Analyzer Installing the Wall Mount Starting your UTRED30-WiFi...
What's Included Please check you have each of the items shown below before continuing with setting up your UTRED30-WiFi. AC Adapter UTRED30-WiFi USB Cable (US and EU adapter only) Wall mount 2x AAA Battery ST100 External (Not Included) (Not Included)
1. Remove the back cover of the UTRED30-WiFi case using the Phillips (cross-shaped) screwdriver. 2. Install the two AAA batteries taking note of the direction to install each battery.
Please ensure there is internet connection on your computer prior to starting this process. Download the latest Connection Wizard from the LogTag website. https://logtagrecorders.com/logtag-online/ 1. Select Start and follow the instructions. 2. Sign in with your LogTag Online account and select SIGN IN. Page 5...
Page 6
Running the Connection Wizard (continued) Select the Create a LogTag Online Account if you do not have an account. You can also click or copy the following link and follow the on-screen instructions; https://logtagonline.com/signup Note: If you selected Skip, you will need to manually register the device on LogTag Online or repeat the LogTag Online Connection Wizard.
Page 7
Wizard (continued) 3. The Connection Wizard will scan for connected LogTag devices. Your device will be automatically registered to your LogTag Online account as soon as your device has been identified. Select Scan Again if your device was not found.
Connecting to your WiFi Network 4. Connect your device to the network by selecting your Wi-Fi network name (or SSID) and providing the network password, then select Next. Passwords are case-sensitive. You can select the eye icon to view the password you entered. Note: Incorrectly entered password is a common reason why your device failed to connect to your network.
Page 9
LogTag Online. This typically takes 10 seconds. Select Close once the connection was successful. Select Again to repeat the steps to connect to your network. 6. Select the LogTag Online Sign In page link to login to LogTag Online. Page 9...
Remote Configuration through LogTag Online LogTag Online is a secure online application that stores the data recorded from your logger against your account. Once your device is connected to your network, it can be configured remotely through LogTag Online. Profile and timezone can be configured for the logger.
Page 11
Remote Configuration through LogTag Online (continued) Signing in to your LogTag Online Account 1. Login to LogTag Online; https://logtagonline.com The location for the first channel will be displayed in the pinned locations on the Dashboard. Page 11...
Page 12
Note: When registering a dual-channel logger such as the UTRED30-WiFi Dual Channel Logger to your LogTag Online account, a location is auto-created for the first channel when your team has a location slot available from your current activation code;...
Page 13
Remote Configuration through LogTag Online (continued) 3. In the settings’ Location Details screen, select the profile to apply to your logger from the Logger Configuration Profile drop-down field that best suits your needs. 4. Select the time zone for the location from the Logger Timezone drop-down field.
Downloading LogTag Analyzer The minimum recommended version is LogTag Analyzer 3.2.0 1. Download LogTag Analyzer from the LogTag website: https://logtagrecorders.com/software/LTA3/ 2. Double-click the downloaded file to open the LogTag Analyzer Setup Wizard and follow the on-screen prompts to install. 3. Select Finish to exit the setup wizard.
The USB socket on the device is located on the bottom, protected by a rubber seal. 1. Select Configure from the LogTag menu or select the Wizard icon. 2. Adjust your logger configuration settings as required. For more information on configuration settings, please...
Wall Mount. Before sticking on the Wall Mount, make sure the sensor cable and the USB cable from the UTRED30-WiFi can both reach the device comfortably without obstruction or at risk of being accidentally disconnected if knocked.
Starting your UTRED30-WiFi Press and hold the START/Clear/Stop button. STARTING will appear along with READY. Release the button once READY disappears. The UTRED30-WiFi now records temperature data. The Logger will not start • You release the button before READY disappears.
Page 18
Viewing Second Temperature Channel Press the CHANNEL FUNCTION button to change the channel on screen. In this example, the display switched from CH1 to CH2. The device will toggle between the two channels if both external probes are configured. Note: The sensor cover can be inserted in an unused channel port.