Philips SBCRU960/05 User Manual page 56

FAQ
How do I reset Pronto?
Normally, resetting Pronto is not necessary. However, if Pronto's touch screen
freezes or if you notice unusual behavior, you need to perform a reset to get Pronto
running again.
1 Press the latch on the battery cover with your thumb and then slide the
cover forward firmly.
2 Lift off the battery cover.
You can find the Reset button in the battery compartment.
3 Use an unfolded paperclip or a sharp
pencil to carefully press the Reset
button.
Pronto restarts.
Pronto beeps twice to indicate
it is ready for use.
4 Set the time again. See 'Changing the Time' on page 14 for more
information.
Note
Why does a device respond to some RF signals and not to others?
Not all commands for all devices work properly with RF signals.
If a device does not respond properly to RF signals sent out by Pronto, you have to
reconfigure Pronto to operate the device with IR signals.
User Guide
56
If you reset Pronto, all personal changes like saved and programmed commands,
IR codes, timers and macros are retained.
Reset button