Philips SBCRU960/05 User Manual page 24

Customizing Pronto
Learning a Button
1 Tap and hold the Pronto icon
screen for 3 seconds.
The Tools Menu appears.
2 Tap
The 'Learn Tool' screen appears.
3 Tap
The last page you have visited appears.
4 Navigate to the Device and the Page that contains the button you want
to learn.
5 Position Pronto and the remote control as illustrated above.
Note
6 Tap the button you want to learn.
A Learning indication appears in the upper right corner of the touch screen.
7 Press and hold the key on the other remote control for 1 second.
Make sure you press the key within 5 seconds.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
See 'Pronto will not learn commands' on page 58 for more information.
8 When you want Pronto to learn other buttons, repeat steps
6 and 7.
9 Press the left firm key labeled
stop learning.
Learning a Device Action
1 Tap and hold the Pronto icon
screen for 3 seconds.
The Tools Menu appears.
2 Tap
The 'Learn Tool' screen appears.
3 Tap
The Device Overview appears.
User Guide
24
in the Tools Menu.
.
Make sure that you aim Pronto's learning eye at the remote control's
IR window.
The distance between Pronto and the remote control should be between
4 and 8 inches (10 and 20 cm).
in the Tools Menu.
.
in the upper left corner of the touch
below the touch screen to
in the upper left corner of the touch