To set the cursor navigation:
1 Tap and hold the Pronto icon
screen for 3 seconds. The Tools Menu appears.
2 Select the
The first Settings Page appears.
3 Press the Page Down hard button at the left side of the Pronto.
The second Settings Page appears.
The cursor navigation is enabled. The Toggle hard button is activated.
5 Tap the Pronto icon
To use the cursor for navigating the Pronto:
6 Press the Left and Right buttons of the cursor.
Pronto navigates through the devices.
7 Press the Up and Down buttons of the cursor.
Pronto navigates through the pages.
8 Press the Toggle button to easily switch from navigating on
Pronto to control audio/video equipment.
The Device Left and Device Right buttons appear in the top area of the
touch screen and the cursor is used for controlling audio/video equipment.
9 Press the Toggle hard button again to switch back to cursor navigation.
Using the Power Features
in the upper left corner of the touch
in the second Settings Page.
in the top center of the touch screen to exit the