Defining The Brand For A Device - Philips SBCRU960/05 User Manual

Customizing Pronto
In general, in the Tools:
Tap
Tap
Tap
Tap
Press the firm key labeled
the Tools Menu.

Defining the Brand for a Device

Pronto contains a huge list of brands and their corresponding IR codes in its
database. Pronto uses these IR codes to control devices. Because there are several
brands using specific IR codes, you have to define the brands and the
corresponding code sets for each device. You can either have Pronto autosearch
the brand or select it yourself. If a device's brand contains more than one IR code
set, you also have to select it.
On the Device Overview you find buttons for the most common video and audio
devices. Pronto is set by default to operate Philips and Marantz devices. For all
devices other than Philips or Marantz, you first have to define the brand before you
can operate them with Pronto.
Selecting the Brand and Code Set for your Device
1 Tap and hold the Pronto icon
screen for 3 seconds.
The Tools Menu appears.
2 Tap
The 'Brand Tool' screen appears.
3 Tap
The Device Overview appears.
4 In the Device Overview, tap the Device for which you want to define
the brand.
A message screen appears.
5 Tap
The 'Brands' screen appears.
User Guide
20
to start using the Tool.
to go back to the Tools Menu.
to confirm an action and save the changes you made.
to cancel an action without saving the changes.
in the upper left corner of the touch
in the Tools Menu.
in the 'Brand Tool' screen.
.
to end a series of actions and go back to