Hoffer Flow Controls CAT1 Series User Manual page 25

Command Description/Allowed Data/Response
FM Rate Units
NB Max Sample Time
LF Out Low
AF Out High
Password
PA
OC Current Out
Appendix B
"0" for seconds
"1" for minutes
"2" for hours
"3" for days
"FLOW UNITS=(DATA)"
(DATA) shall be:
"SEC" for seconds
"MIN" for minutes
"HR " for hours
"DAY" for days
"1" to "80"
"MAX M TIME=(DATA)"
"0.000" to a maximum value of the Out High setting
"4mA FLOW =(DATA)"
Minimum is the Out Low Setting (LF) to a maximum of the
following:
"99999.999" if RD = 3
"999999.99" if RD = 2
"9999999.9" if RD = 1
" 99999999" if RD = 0
"20mA FLOW =(DATA)"
"0" to "9999"
"PASS WORD =(DATA)"
"0" - Current output follows rate.
"1" - Current output set to 4mA.
"2" - Current output set to 12mA.
"3" - Current output set to 20mA.
For "0", response = " Output equal to input."
For "1", response = " Output is
For "2", response = " Output is 12mA."
For "3", response = " Output is 20mA."
–
Communications 19
4mA."
HP-310