Set Up The Router As An Access Point - TP-Link Archer C4000 User Manual

Chapter 4
Note: It may take 1-2 minutes to make the settings valid.
Tips:
• If your internet connection type is
• If you use Dynamic IP and
please go to Advanced >
• If you still cannot access the internet, refer to the
4 3

Set Up the Router as an Access Point

The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
will reboot and switch to Access Point mode.
BigPond Cable, please go to
PPPoE and you are provided with any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
Operation Mode, select
Advanced > Network
section for further instructions.
Access Point and click Save. The router
Set Up Internet Connection
> Internet to set your router.
18