TP-Link Archer C4000 User Manual page 82

Chapter 12
How can I do that?
1 Change the routers' LAN IP addresses to two different IP addresses on the same
subnet. Disable Router B's DHCP function.
2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
Router A.
3 Go to Advanced
4 Click Add and finish the settings according to the following explanations:
Network Destination:
route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of
Router A. In the example, the IP address of the company network is the destination IP
address, so here enter 172.30.30.1.
Subnet Mask: Determines the destination network with the destination IP address.
If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the
Router A
LAN: 192.168.0.1
192.168.0.100
> Network > Static Routing.
The destination IP address that you want to assign to a static
Customize Your Network Settings
Router B
WAN: 172.30.30.100
LAN: 192.168.0.2
Switch
PC
Company's server
172.30.30.1
78