Table of Contents
Advertisement
Chapter 13
2. Use the default value
1024 and 65535.
3. Select
All Devices
4. Click Save.
•
Allow Specified device to manage the router remotely:
1. Select
Enable Remote
2. Use the default value
1024 and 65535.
3. Select
Specified Devices
4. Enter IP address of the device in
5. Click Save.
Devices on the internet can log in to
number
(such as http://113.116.60.229:1024) or
port number
to manage the router.
Tips:
•
You can find the WAN IP address of the router on
•
The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
13 12 System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
•
To save the system log locally:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to
Advanced
>
3. Choose the type and level of the system logs as needed.
4. Click
Save Log
to save the system logs to a local disk.
HTTPS Port: 443
in
Remote
Managers.
Management.
HTTPS Port: 443
in
Remote
Managers.
Only this IP
https://Router's WAN IP address: HTTPS port
Basic
System Tools
>
System
and
HTTP Port: 80
or enter values between
and
HTTP Port: 80
or enter values between
address.
http://Router's WAN IP address: HTTP
>
Network Maps
> Internet.
Set Up a Dynamic DNS Service Account
Log.
Manage the Router
if you want to log
97
Hide quick links:
Advertisement
Table of Contents
