Chapter 4
2 )
Dynamic IP (SLAAC/DHCPv6):
your ISP requires. Click Save.
3 )
PPPoE:
By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Save
and then click Connect.
Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the
same session with IPv4 connection
connection.
Click
Advanced
to input further information if your ISP requires. Click
checkbox and manually enter the username and password for the IPv6
Set Up Internet Connection
Advanced
to input further information if
PPPoE
21