Table of Contents
Advertisement
Chapter 14
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enable
Remote Management via HTTPS
4. Enter the port number to be used to access the router with greater security between
1024 and 65535. The default port number for HTTP is 80 and 443 for HTTPs.
5. If you want a specific device to be allowed to access the router remotely, select
the Following IP/MAC Address
the device. If you want all devices to be allowed to access the router remotely, select
All.
6. Click
Save
and now you can remotely access and manage the router via the displayed
address.
14. 9. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
•
To save the system log in local:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to
Advanced
>
3. Choose the type and level of the system logs as needed.
System Tools
>
Administration
and enter a valid local IP address or MAC address of
System Tools
>
System
and enable
as needed.
Log.
Manage the Router
Remote
Management.
Only
79
Advertisement
Table of Contents
