Super Low Mode - Panther S-TYPE DOLLY User Manual

WIRELESS HANDSET

SUPER LOW MODE

Super Low Mode
In order to use the full length of the scissors-
arm, we developed the patented fullrange
technology. This allows the scissors-arm
to move the same way up as down into the
negative.
To prevent crashing the floor with the
scissors-arm by mistake you have to activate
the Super Low Mode in the Service Menu
when it is needed.
Attention
If the Super Low Mode is
acivated, please operate
very carefully, because it
!
will run over it's ground level
position.
Make sure the way for the
Scissors-Arm is completeley
free and that you don't
damage the Scissors-Arm or
the floor.
How to activate the Super Low Mode
Before you can acitvate the Super Low Mode you have to drive the scissors-arm manually all the
way up to it's highest position until it hits the end switch.
Now enter the Service Menu and naviate to point „Arm" by pressing the
times. By pressing the
Mode.
Exit the Service Menu and go back to the Limitmode. Now you can drive all the way down - even
below ground level.
To set the Scissors-Arm back to the standard Low Mode you also have first
to drive it manually all the way up to it's highest position until it hits the end
switch.
ARM button you can choose now between Low Mode and Super Low
25
M button several