Connect - Panther S-TYPE DOLLY User Manual

WIRELESS HANDSET

CONNECT

No Connection:
If the wireless handset is not able to
connect with your dolly you will see
the screen left.
You can check this situation by the crossed
wireless icon.
Connected:
If your wireless handset is connected,
but the dolly is turned off, you will
see this „O" symbol.
Now you can turn on you dolly. This is done by
pressing ON
By pressing the LIM
into LIMIT-Mode (which allows you to program
limits & drive the arm manually).
By pressing the PRG
into PROGRAM-Mode (to program sequences of
movements).
„Level" and on the right side of the display it
will show a „?" which means the dolly does not
know it's arm level / position. This happens if the
S-Type is without power (e. g. changing batteries).
To let the handset know where the arm is you
have to activate the LIMIT-Mode and drive the
arm manually up to it's highest position.
15
button the dolly will get
button the dolly will get