Table of Contents

Advertisement

WIRELESS HANDSET

MANUAL DRIVE

The Wireless Handset comes with a blue high sensitive rocker. Depending on how hard you are
pressing upwards / downwards the speed of the Arm increases or decreases.
Press the rocker upwards to drive the Scissors-
Arm up.
How to drive the arm manually
To drive the S-Type Scissors-Arm manually
you have to be in LIMIT-Mode (which is the
„standard"-mode of the dolly).
!
Press
Side View
Press the rocker downwards to drive the
Scissors-Arm down.
16
Attention
Make sure that „Arm" is
set to „low" (as shown in
the picture). If it is set to
„super-low" please reset
it to „low" (check page
25).
If
„super-low"
required,
please
very carefully, because it
will run over it's ground level
position.
is
operate

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents