About This Guide; Overview And Scope; Related Documentation; Comments - Copley Controls Xenus XSL-230-36 Regeneration Manual

Overview and Scope

This guide describes the selection, installation, and configuration of external regen resistors for
Xenus Amplifiers.

Related Documentation

Users of the CANopen features should also read these Copley Controls documents:
•
Xenus User Guide
•
Using CME 2 with Xenus
Information on Copley Controls Software can be found at:
http://www.copleycontrols.com/motion/software

Comments

Copley Controls Corporation welcomes your comments on this guide. See
http://www.copleycontrols.com

Copyrights

No part of this document may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission of Copley Controls
Corporation.
Xenus and CME 2 are registered trademarks of Copley Controls Corporation.

Document Validity

We reserve the right to modify our products. The information in this document is subject to change
without notice and does not represent a commitment by Copley Controls Corporation. Copley
Controls Corporation assumes no responsibility for any errors that may appear in this document.
Copley Controls Corp.
for contact information.
A T
BOUT
G
HIS UIDE
iii