Product Warnings; Revision History - Copley Controls Xenus XSL-230-36 Regeneration Manual

About this Guide

Product Warnings

Observe all relevant state, regional, and local safety regulations when installing and using this
product. For safety and to assure compliance with documented system data, only Copley Controls
Corporation should perform repairs to amplifiers.
DANGER: Hazardous voltages.
!
Exercise caution when installing and adjusting.
Failure to heed this warning can cause equipment damage, injury, or death.
DANGER
Risk of electric shock.
!
High-voltage circuits on J1, J2, and J3 are connected to mains power.
Failure to heed this warning can cause equipment damage, injury, or death.
DANGER
Use equipment as described.
!
Operate amplifiers within the specifications provided in this manual.
Failure to heed this warning can cause equipment damage, injury, or death.
DANGER

Revision History

Release Date
1.0 July 2003
1.1 November 2004
iv
Applies to
Xenus firmware version 2.16
CME 2 Software version 3.1
Xenus firmware version 4.0.
CME 2 Software version 4.0.
Xenus Regeneration Guide
Comments
Initial publication.
Corrected model number
(p. 2).
Copley Controls Corp.
in specifications table