Replacing Front Panel - Graco THERM-O-FLOW T7 Series Instructions Manual

Replacing front panel

1.
Disconnect hose, see Replacing hose, page 23.
2.
Disconnect any accessories connected to the auxil-
iary bypass connector.
3.
Using 3/32 in. hex wrench, remove screws (17)
from front panel shield (16).
4.
Using a 5/16 in. socket wrench, remove screws and
washers (12, 13) from underneath front panel (15).
13
12
309832D
17
16
15
5.
Pull front panel (15) from tank. Disconnect 9-pin
(X), 12-pin (Y), and ground wire (Z) connections.
Z
Y
Repair
X
15
25