Graco THERM-O-FLOW T7 Series Instructions Manual page 17

Setting auxiliary controls
Auxiliary input selection is accomplished on per channel
basis and can only be accessed when the control is in
standby mode.
1.
Press the standby toggle
2.
Press the loop select up/down
priate auxiliary channel
3.
To activate or deactivate selected auxiliary, press
the loop select on/off
selection will show GREEN if on.
309832D
.
to select appro-
.
. LEDs to the left of the
4.
To resume operation, press the standby
toggle .
Setting standby timer
Setting the standby will turn off the tank, hose, and
applicator heat for a selected amount of time. When the
standby time is complete, the tank settings automatically
resume to previous set temperatures and heating con-
tinues.
1.
Press the standby
2.
Press temperature increment/decrement
increase or decrease time. Set time will appear in
the set temperature display. You must enter a mini-
mum of five minutes for standby time.
Operation
toggle.
to
17