Connecting Applicator; Connecting Timers And Controllers - Graco THERM-O-FLOW T7 Series Instructions Manual

Connecting applicator

See hot melt tank applicator manuals for specific
instruction on how to install applicators to the hot melt
tank.
• 310801 Manual Applicator manual
• 310803 Automatic Applicator manual
12
Connecting timers and
controllers
See EC-20/40 timer manual 310814 for instruction. See
appropriate applicator manual for air saver control
instructions.
• 310801 Manual Applicator manual
• 310803 Automatic Applicator manual
Pattern controllers supplied by Graco come with termi-
nated cables to simplify connection to the melt system.
A cable with one end unterminated (118243) is available
to allow connection of a customer-supplied controller
into the melt system.
Setup
309832D