Graco THERM-O-FLOW T7 Series Instructions Manual page 24

S
K
F . 5: Connecting hose
IG
3.
Allow tank unit to cool before repairing.
4.
Disconnect applicator from hose. See appropriate
applicator manual for instructions.
24
R
P
J
5.
Remove bayonet ring from the electrical connector.
6.
See F . 5. Pull electrical connector (K) from the
IG
hose electrical receptacle (S).
7.
See F . 5. Using an 11/16 in. wrench, remove
IG
hose (J) from the fluid outlet fitting (P).
8.
Replace hose. To reconnect hose, see Connecting
Hose, page 11.
Repair
309832D