Ista Ultego III perfect Manual page 9

ultego® III perfect
*) It is up to the user to ensure that only meaningful values are entered. No plausibility check is made and "incorrect" values
can be applied (month > 12 etc.)
The required size is selected with the LCD button 1 and activated with the LCD button 2.
Performing parameter setting
LCD button 2 is used to change the blinking digit step by step or reset error F8 or the maxima. LCD button 1 applies the value
set in the blinking digit. The next digit to the right of this then blinks, can be set again with the LCD button 2 and can be
applied with LCD button 1. As the final acknowledgment of a display line, a star symbol is briefly displayed.
If incorrect entries are made, parameter setting be performed again.
G.83.0101
ultego® III perfect
ista International GmbH – Grugaplatz 2 – D-45131 Essen
Reset error message F8
(only displayed if F8 is pending)
Reset the maxima
Reset the missing time and the flowrate measuring time
Enter the yearly set day (day and month) *)
Enter the monthly set day (day) *)
Enter the date (day, month, year) *)
Enter the time (hour, minute, second) *)
Enter the property number, 8-digit (also M-bus secondary address)
Enter the M-bus primary address for module 1 (0..255) *)
Enter the M-bus primary address for module 2 (0..255) *)
Select the first module function for module 1 (CE or C2)
Select the second module function for module 1 (CV or CT or RI)
Select the first module function for module 2 (CE or C2)
Select the second module function for module 2 (CV or CT or RI)
Select the maxima measuring period: 7.5-15-30-60 min / 3 6 12 24 h
Return to normal mode
NOTE:
The functions for modules 1 and 2 are also offered if no or any other module is plugged.
In this way, the heat meter can be parameterized before the modules are fitted.
NOTE:
Parameter setting can be exited by pressing the service button again ("escape function"). In this case,
the last valid value is displayed unchanged.
6.1 - 230608