Switching Prevent Condensation On Or Off; Home Network; Automatic Display Lock For Cleaning; Alarm - Gaggenau RB472704 Instruction Manual

en-us

Alarm

Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Rest mode is activated.
1.
Open menu item Automatic door opening of the
refrigerator or the freezer compartment.
2.
Select menu item Push-to-open system.
3. Press ™ button.
4.
Select menu item Opening force. Here you can select
the level of force required to activate automatic door
opening.
5.
Select menu item Opening duration. Here you can
select how long the door should remain open a crack
before it closes again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1.
Open menu item Automatic door opening of the
refrigerator or the freezer compartment.
2.
Select menu item Pull-to-open system.
3. Press ™ button.
4.
Select menu item Opening force. Here you can select
the level of force required to activate automatic door
opening.
Switching off automatic door opening
1.
Open the menu item Automatic door opening.
2.
Select menu item Off.
3. Press ™ button.
Switching Prevent condensation on or
off
This function is only available with 3-door appliances.
3-door appliances are equipped with a door pillar
featuring condensation protection.
You can open the left-hand door of the refrigerator
compartment without opening the right-hand door
beforehand.
22
9
CAUTION
Never unfold the door pillar when the door is open!
It can get jammed when closing the door and
become damaged, or itself damage the front panel
of the right-hand door.
A heater is built into the door pillar to prevent
condensation. Switching condensation protection on or
off switches the heater on and off .
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
4. Press B button to move to the menu item Prevent
condensation.
To change the setting, press % button.
5.

Home network

You can use this function to establish a connection
between the refrigerator and your mobile device.
~ "Home Connect" on page 23

Automatic display lock for cleaning

You can use this function to select whether the automatic
clean lock is switched on automatically when the door is
opened.
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
4. Press B button to move to the menu item Automatic
display lock for cleaning.
5. To change the setting, press % button.
Alarm
M
D oor alarm
A l a r m
If the appliance door is open for a long time, the door
alarm (continuous audible signal) switches on.
Close door.
▯
The audible warning signal is switched off.