Setting The Touch Field Color; Setting The Touch Field Tone Type; Setting The Touch Field Tone Volume; Setting The Signal Tone Volume - Gaggenau RB472704 Instruction Manual

Setting the touch field color

Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press C button to move to the menu item Touch field
4.
color.
5. Press % button.
6. Press B C buttons to move to the required setting.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.

Setting the touch field tone type.

You can change or switch off the sound of the tones
generated when pressing keys.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button to open the menu item.
Press C button to move to the menu item Touch field
4.
tone type.
Press % button to open the menu item.
5.
6. Press B C buttons to select the required setting.
Press ™ button.
7.
The setting is saved.
8. Press ' button to exit the menu.

Setting the touch field tone volume

You can adjust the volume level of the sounds generated
when pressing keys.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
Press ™ button to open the menu item.
3.
4. Press C button to move to the menu item Touch field
tone volume.
Press % button to open the menu item.
5.
6. Press B C buttons to select the required setting.
7. Press ™ button.
The setting is saved.
8. Press ' button to exit the menu.

Setting the signal tone volume

You can adjust the volume level of the signal tones
generated e.g. with alarms.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
Press ™ button to open the menu item.
3.
4. Press C button to move to the menu item Signal tone
volume.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
7. Press ™ button.
The setting is saved.
8. Press ' button to exit the menu.
Switching the water filter counter on
and off
If you have replaced the water filter with a particle filter,
switch the water filter counter off. It is not needed in this
case as the particle filter does not have to be replaced.
1. Press à button to open the main menu.
2. Press B button to move to the Basic settings menu.
Press ™ button.
3.
4. Press C button to move to the menu item Water filter
counter.
To change the setting, press % button.
5.
6. Confirm the selection by pressing ™ button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly darker
when it is closed.
Switching dimming on or off when opening and closing
the door
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press C button to move to the menu item Dimming
4.
when door is opened and closed.
5. Press % button.
6. Press C button to move to the menu item On or
Off.Confirm by pressing ™ button.
Operating the appliance
en-us
19