Performance Checklist - Envirovent FILTERLESS EXTRACT FAN SELV Series Installation Manual For Engineer / Installer

Performance Checklist

• Is there power being supplied to the unit?
• Are all internal electrical connectors attached or have any been
disconnected?
• Has the electronic circuit board been removed for any reason?
• Is the central cartridge correctly seated in the rear carcass with no
stray wires obstructing it?
• Does the impeller spin freely? Ensure the two clips have been fully
engaged.
• Is the front cover in place? The unit will not operate until the front
cover is fitted.
• Does the pullcord activate? Ensure the pullcord is not trapped
inside the unit.
ON-SITE INSTALLATION AFTER SALES SERVICE
Please ensure that you have read and understood the installation
instructions. In the event of an on-site installation problem, or if
you have any queries about the unit, just call us and ask to talk to
a member of our technical team. In the majority of cases the issue
can be resolved over the phone.
HOTLINE NUMBER: 01423 859 395
In cases where the problem cannot be resolved over the phone,
contact your wholesaler to agree a return.
On-site call outs are available, note that charges may apply.
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
DO NOT
THROW AWAY
11