Setting "Automatic Message Scrolling - Bosch BT220 Technical And Operations Manual

BT220 Technical Information and Operation
Operation
5.9.3

Setting "Automatic Message Scrolling"

5-26
In case of events with a text of more than 2 lines, the BT220 only shows the
first 2 lines initially. The remaining text can then be made visible in the follow-
ing way:
- manually using the keys Y and B (these call up the previous and the
next two lines) or
- automatically using the "Message Scroll" function (display of the next two
lines within a certain time period).
In the following description we assume that the BT220 is in the message dis-
play mode (see chapter 5.1, page 5-2).
Procedure 1. Press the MEN key.
The menu item "Diagnostic memory" appears in the second display line.
2. Keep pressing the B key until the text "Special function" is displayed in
the second display line.
3. Press the
4. Keep on pressing the B key until the text "System functions" is displayed
in the second display line.
5. Press the
6. Press the B key until the text "Autom. message scroll" is displayed in the
second display line.
7. Press the
8. The current setting is displayed in the first line.
To change values:
To cancel the function:
9. Move the cursor with the cursor keys A and " to the entry to be changed
and enter the new value using the keys Y and B (scroll time range: 1 to
99 sec.).
10.To activate selected values:
To keep the current setting:
Proceed to step 8.
key.
key twice.
key.
Press the VAR key.
Press the MEN key twice.
Press key
Press the MEN key.
1070 080 037-101 (99.01) GB
.