Charging Batteries - Sony AC-DN2B Operation Manual

Ac adaptor
Hide thumbs Also See for AC-DN2B:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19

Charging Batteries

1
Attach the lithium-ion battery pack.
Battery pack
2
Plug in the AC power cord connected
to the AC-DN2B into an AC power
outlet.
At a room temperature of 25 °C
(77 °F), the AC-DN2B will provide an
85% charge to a BP-FL75 or
BP-FLX75 in about 330 minutes.
Notes
• When the AC-DN2B has charged the
lithium-ion battery pack to about 85%
capacity, all four indicators on the
lithium-ion battery pack will light up.
• The actual charge level will not be shown
on the indicators while the AC-DN2B is
still attached to the battery. To check the
charge level, you must first disconnect
the battery from the AC-DN2B.
• Never charge a battery with the AC-
DN2B while the battery is being used to
operate a device with a power rating of
more than 100 W. Doing so may cause
excessive power consumption and
overheating in the AC-DN2B, or a
malfunction in the device. This warning
does not apply to devices rated at 100 W
or less.
Charging Batteries
31

Advertisement

Table of Contents
loading

Table of Contents