Charging The Unit - Sony DRC-BT15N Operating Instructions Manual

Wireless audio receiver
Table of Contents

Advertisement

Charging the unit

The unit contains a rechargable Lithium-Ion battery, which should be
charged before using for the first time.
1
Connect the supplied
AC power adaptor with
the battery charging
stand.
Battery charging
stand (supplied)
AC power
adaptor (supplied)
2
Connect the supplied
AC power adaptor to an
AC outlet.
To an AC outlet
8
GB
(Rear)
To DC IN
3 V jack
Battery charging
stand (supplied)
3
Put the unit on the
battery charging stand.
Contact pin
Battery charging
stand (supplied)
Rest the unit on the battery
charging stand so that the unit's
contact point meets the contact
pin on the battery charging stand,
and make sure that the indicator
(red) lights up.
Charging is completed in about
2.5 hours* and the indicator (red)
goes off automatically.
* Time required for empty battery to
recharge.
Note
When you attach the strap to this unit,
do not let the strap get caught between
the unit and the battery charging stand.
Tips
• If the AC power adaptor is connected to
an AC outlet while the unit is turned on,
the unit will be turned off automatically.
• This unit cannot be turned on while
charging.
Wireless Audio
Receiver

Advertisement

Chapters

Table of Contents
loading

Table of Contents