Local Disc Installation; How To Install Internal Hard Drive - ELECTROCOMPANIET ECM 1 MKII Owner's Manual

LOCAL DISC INSTALLATION

Your ECM 1 MKII supports adding an internal hard drive or SSD for storing audio files. A
drive with a SATA interface is required for this connection. Both 3,5" and 2,5" drives can
be mounted.
WARNING!
The disk will be automatically formatted for use. All data on the drive will be lost. If a hard
drive is installed it will be turned off when not in use. This prevents vibrations from negatively
influencing audio playback quality. ECM 1 MKII has no limitation for internal disk capacity.

How to install internal hard drive

1. Flip the ECM 1 MKII
3. Insert the HDD (3,5'' or 2,5'')
C
M
Y
CM
MY
CY
CMY
K
5. Connect the wires
2. Remove screws and take out
the HDD holder
4. Tighten the screws
6. Tighten the screws
8