Local Disc Installation; How To Install Internal Hard Drive - ELECTROCOMPANIET ECM 1 Owner's Manual

ENG

LOCAL DISC INSTALLATION

Your ECM 1 supports adding an internal hard drive or SSD for storing audio files. A drive
with a SATA interface drive is required for this connection. Both 3,5" and 2,5" drives can
be mounted. All common filesystems are supported, including: NTFS, ExFAT, FAT, EXT4, HFS+
NOTE:
The disk will be automatically formatted for use. All data on the drive will be lost. If a hard
drive is installed it will be turned off when not in use. This prevents vibrations from negatively
influencing audio playback quality. ECM 1 has no limitation for internal disk capacity.

How to install internal hard drive

1. Flip the ECM 1
3. Insert the HDD (3,5'' or 2,5'')
C
M
Y
CM
MY
CY
CMY
K
5. Connect the wires
2. Remove screws and take out
the HDD holder
4. Tighten the screws
6. Tighten the screws
8