Local Disc Installation; How To Install Internal Hard Drive - ELECTROCOMPANIET ECM 2 Owner's Manual

Local disc installation

Your ECM supports adding an internal hard drive or SSD for storing media files. A drive with a SATA interface
drive is required for this connection. Both 3,5" and 2,5" drives can be mounted.
All common filesystems are supported, including: NTFS, ExFAT, FAT, EXT4, HFS+
NOTE:
The disk will be formatted for use. All data on the drive will be lost. If the hard drive is installed it will be turned
off when not in use. This prevents vibrations from negatively influencing audio playback quality.
ECM have no limitations for internal disk capacity.

How to install internal hard drive

1.
Flip the ECM 2
3
. Insert the HDD (3,5'' or 2,5'')
C
M
Y
CM
MY
CY
CMY
K
5.
Connect the wires
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
2.
Remove screws and take out the HDD holder
4.
Tighten the screws
6.
Tighten the screws
9
ENG
Installation
i