Tips And Troubleshooting - ELECTROCOMPANIET ECM 1 MKII Owner's Manual

TIPS AND TROUBLESHOOTING

Streaming from Apple devices
On Apple devices, it is possible to stream all audio from your iPhone/iPad to the ECM 1
MKII via "Airplay". This is represented by this symbol
We do not recommend using this system playing from Spotify, Qubuz and Tidal. Instead,
use our EC PLAY App to control playback.
For Spotify, use Spotify connect, as represented in the Spotify App by the device icon.
This will allow the ECM 1 MKII to stream directly from the internet, which optimizes the
bandwidth, and saves battery life on your iPhone/iPad.
Connecting to WiFi
We recommend that the ECM 1 MKII has a link quality of minimum 70%, and better than
40 Mb/s link speed. This can be verified in our App, in the More -> Network menu.
Higher link quality and speed is recommended for a better user experience. We recom-
mend a wireless AC router with MIMO technology for maximum performance.
Resetting your system
If your system acts strangely, it can be reset to its default settings by using a paperclip
to press the RESET button in the back ( see illustration "rear panel overview") The yellow
led will blink a few times, after which the green led will start to blink. The unit will have
restarted into the initial setup and you can then follow the steps in this quick start guide.
To fully reset the software of the system, please go to Firmware and Software chapter under
support on www.electrocompaniet.com and follow the instructions for software download.
WI-FI Setup with WAC ( Wirelesss accessory configuration)
- If airplay speaker is not shown, or my unit does not appear there?
Make sure that the green LED is on. If it is off, press the RESET button.This resets and
restarts the unit, and it will be back online in about one minute.
If the LED still not turns on green, please contact support. If the LED is on but the unit still
does not appear, please temporarily connect the unit to the network by Ethernet cable, and
follow the steps on page 9.
15