Subscribe to Our Youtube Channel
Related Manuals for ELECTROCOMPANIET EMP - 1
Summary of Contents for ELECTROCOMPANIET EMP - 1
- Page 1 EMP - 1 Owner’s manual Note ! This manual is under construction Please download the latest version from www.electrocompaniet.no/Manuals.html...
- Page 2 To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture. Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personal. The warranty is void if non-authorized personnel tamper with the product. Use only authorized Electrocompaniet service center.
- Page 3 Design concept and audio philosophy: Thank you for purchasing this fine audio equipment. First of all we will give you a small introduction to the ideas behind the EMP-1 Technically, a cd (or a DVD) is a simple construction, built up with a lot of digital information, represented by only two states - zero or one.
- Page 4 Unpack the unit carefully. Save all packaging materials for future shipment. The contents of the carton 1 pcs Electrocompaniet EMP 1 – Universal Player 1 pcs AC mains cord. 1 pcs Inspection card. 1 pcs Remote control...
- Page 5 How to avoid noise problems The EMP 1 contains delicate circuits that are sensitive to magnetic stray fields. The unit should not be placed near main transformers, TV sets, etc. Care should also be taken regarding placement of the interconnect cables. Do not run interconnect cables in parallel with main cords or speaker cables.
- Page 6 Due to high class A operation in all Electrocompaniet designs, it is normal for the EMP 1 to feel warm. Proper ventilation is important. The EMP 1 should never be completely covered. A good rule of thumb is to allow at least 3 –...
- Page 7 Connecting the EMP 1 Analog Connect the left output to the left input on the preamplifier or the integrated amplifier. Connect the right output to the right input on the preamplifier or the integrated amplifier. Connect the Center, Subwoofer, and Surround left/right if you want to use the EMP 1 in a surround setup.
- Page 8 Front panel controls The power on/off button is localized in the center of the front panel. Generally, we recommend that you use the Standby button located on the remote control. When not using the EMP 1 for a long period, turn the main switch off and disconnect the unit from the mains outlet.
- Page 9 Using the ECT 2 remote control (sold separately) Before you can use the ECT 2, you have to connect the ECT 2 to the EMP 1. Follow these steps to connect the ECT 2: 1. Turn off the EMP 1 2.
-
Page 10: Technical Data
Technical data Output impedance 100 ohm Output level Balanced, 0dBFs 4.5Vrms Noise floor 20 - 20 kHz < - 130 dB Frequency deviation 20 - 20 kHz < 0.05 dB Channel separation > 110 dB THD + N 20 - 20 kHz <... - Page 11 Norway for repair. 3. An accompanying letter describing faults, symptoms, or problems with the unit. 4. Always ship the unit in its original carton and packaging material to prevent damage in transit. Electrocompaniet will not cover damages incurred in transit.
Need help?
Do you have a question about the EMP - 1 and is the answer not in the manual?
Questions and answers