Battery Type; Intended Use - DeWalt DCS777 Manual

English
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the environment.
Charge D WALT battery packs only with designated D
e
chargers. Charging battery packs other than the designated
D WALT batteries with a D
e
or lead to other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating indicates 108
Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example: Wh rating
indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCS777 operates on a 54 volt (60V Max) battery pack.
These battery packs may be used: DCB546, DCB547, DCB548. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 Partly assembled machine
2 Hex keys (4 mm and 6 mm)
1 216 mm TCT saw blade
1 Material clamp
1 Inner washer 25.4 mm
2 Battery packs (T2 model)
1 Charger (T2 model)
2 Base extension handles and installation hardware
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior
to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Keep hands away from blade.
Keep hands 100 mm from either side of saw blade.
Do not stare directly into the light source.
Carrying point.
12
WALT
e
WALT charger may make them burst
e
Date Code Position (Fig. B)
The Date Code 32 , which also includes the year of manufacture, is printed
into the housing.
Year of Manufacture
Description (Fig. A–D)

WARNING: Never modify the power tool or any part of it. Damage or
personal injury could result.
On/off switch
1
Guard lock up release lever
2
Fixed upper guard
3
Outer flange
4
Blade bolt
5
Lower blade guard
6
Saw blade
7
Sliding fence lock knob
8
Fixed table
9
Kerf plate
10
Mitre arm
11
Mitre latch
12
Rotating table/mitre arm
13
Mitre scale
14
Sliding fence
15
Material clamp
16

Intended Use

Your D WALT cordless compact mitre saw has been designed for
e
professional cutting wood, wood products and plastics. When using the
appropriate saw blades, sawing aluminum is also possible. It performs the
sawing operations of cross-cutting, bevelling and mitring easily, accurately
and safely.
This unit is designed for use with a nominal blade diameter 216 mm carbide
tip blade.
DO nOT use under wet conditions or in presence of flammable liquids
or gases.
These miter saws are professional power tools.
DO nOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.

WARNING! Do not use the machine for purposes other than intended.
• Young children and the infirm. This appliance is not intended for use
by young children or infirm persons without supervision.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are supervised by a person
responsible for their safety. Children should never be left alone with
this product.
ASSEMBLY

WARNING: To reduce the risk of serious personal injury, turn
machine off and disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.

WARNING: Use only D
WALT battery packs and chargers.
e
Unpacking
The motor and guards are already assembled onto the base.
2019 XX XX
Rail lock knob
17
Bevel clamp handle
18
Bevel scale
19
Bench mounting holes
20
Lock down pin
21
Rails
22
Saw head
23
Hex wrenches (Fig. D)
24
Battery pack
25
Battery pack release button
26
Fuel gauge button
27
Lock off switch
28
Bevel override button
29
Dust extraction port
30
Base extention handles
31
Date code
32