Advertisement
Changing the E-step value
The E-step value tells the controller how many steps (micro steps) that needs to be
sent to feed 1mm filament. The Wanhao D9 E-step value needs to be updated to
achieve the correct extrusion volume. The reason for this is that the Bondtech
extruder has a different drive gear diameter and a gearing ratio. The increased E
step value means that the extruder will feed the material with higher precision and
with a lot higher force. This guide will show how the E-step value can be adjusted
directly on the printer.
Good luck with your Bondtech feeder!
If you have any questions, please first read the FAQ
(https://www.bondtech.se/en/customer-service/faq/). If the question still hasn't been
answered feel free to contact us by opening a ticket in our support system that you
find
here
● The E-step value can easily be
changed on the touch panel
home screen. Click on Settings.
• Click on Motor settings
• Press the + sign for E Axis until
the value is changed to 415
Installation manual Bondtech Wanhao D9 V1.0
12
Advertisement
