CipherLab RK95 Reference Manual page 34

RK95 Mobile Computer
To install the snap-on cup:
Simply hold the snap-on cup toward the bottom
of the RK95 mobile computer, and push the
snap-on cup upwards to make it to be attached
to the device. A "click" sound is made once the
snap-on cable is connected with the bottom of
the device in place.
To remove the snap-on cup:
Holding the RK95 device by one hand while
pressing the release buttons and pulling the
snap-on cable downwards by the other hand to
make the device and the snap-on cup apart.
While the device battery is being charged, the LED on mobile computer will indicate
charging status.
LED Indicator
Charging
Status
Red, solid
Red, blink
Green, solid
No light
Push
Press
Description
Charging the mobile computer
Charging error
Charging complete
The cable is not correctly connected
30
Click!
Press
Click!
Pull